EnergyNews wire, 13 h ago

Bluetti Apex 200 adds stackable battery modules for home and mobile use

Reported by CleanTechnica

Image: CleanTechnica

CleanTechnica has tested the Bluetti Apex 200, a portable power station that Bluetti now offers in a modular format. The unit stores 2.5 kilowatt-hours on its own. Extra storage modules, such as the B300K, can be stacked underneath and connected directly to the main unit. The reviewer says this lets owners add capacity in smaller, lighter steps, instead of mounting one large battery to a wall, which would normally need an installer. Bluetti supplied the unit, the B300K and two solar panels for the review.

The Apex 200 acts as the master controller for the whole stack. When it is connected to a wall outlet or to solar panels, it shares the energy across every module plugged in, so the owner needs only one charging connection. The reviewer gives an example. A person can take an Apex 200 and a B300K on a week-long RV trip, then return them to the garage afterwards and add the capacity back to the home system. The same setup can be carried to a park with two portable panels.

The unit has a switch with three charging modes. Auto is the default and lets the unit choose its draw, up to the maximum. Silent charges more slowly, at roughly 400 to 600 watts in the reviewer's experience. Turbo runs the fans and draws the most power, between 1,600 and 1,660 watts AC from the wall during testing. The reviewer notes that even good charging cables warm up at this level, and says the maker has accepted some trade-offs to manage the heat.

Solar input runs through two routes: MC4 connectors and an XT60 input. The reviewer says the two can together take up to 3,000 watts of solar. Panel voltage must match the limits of each port, though. Two 100-watt panels wired in parallel gave only 40 volts, which was too low. Wiring them in series raised the voltage to 80 volts, above the 60-volt minimum for the MC4 ports, and charging started. The reviewer says filling a 5.5 kWh stack from around 2,000 watts of solar takes a long time. Releasing MC4 connectors needs a special release tool. The XT60 connector is a simpler plug-in option for lower-voltage setups.

For output, the team ran a 1,500-watt electric fireplace and a 1,500-watt portable heater at the same time. That is a total draw of around 3,000 watts. They also added a kitchen multicooker. The Apex 200 handled all of these loads without problems. The stated continuous output is 3,200 watts. With a B300K attached it rises to 3,600 watts. Peak output can reach 4,800 watts for a few seconds.

The modular design has clear limits on size. A single Apex 200 can be expanded to 33.3 kWh, and larger setups are possible. Three Apex 200 stacks can be linked through the Hub 1 accessory for just under 100 kWh of storage. That build uses three Apex 200 units and several 5 kWh B500K modules. The reviewer compares the parts to building blocks that can be arranged for each household's needs.

The text we received does not give a price, a shipping date or a regional availability. It is also a single reviewer's hands-on test, with results for one setup and one set of appliances. Readers who plan a home installation should check the current specifications, wiring limits and charging behaviour with the maker before they buy.

Enjoying this? Get the Energy brief

Every Friday: prices, subsidies and what changed in your market.

✓ Free · seven editions · one click to leave

Topics
Story continues on CleanTechnicaAdd us as a preferred source on GoogleSee our stories first in Google’s Top Stories.
Get alerts on big newsOnly the big news, at most once a day. No email, no account.

Original reporting by the sources above. Summary by smart-home.space.