Felicity IVGM6KLP1G2: 6 kW hybrid inverter with two MPPTs and a 40 to 60 V battery
Domótica Solar tests a 6 kW hybrid inverter from Felicity, priced at around 800 euros, and highlights its two MPPTs, its IP65 rating and its app-based setup.
Felicity IVGM6KLP1G2: 6 kW hybrid inverter with two MPPTs and a 40 to 60 V battery. Plays from YouTube (privacy-enhanced mode).This is our summary of Domotica Solar’s video, published with their permission. The full video and all credit for it are on their channel.
What the video covers
Introduction to the Felicity 6 kW solar inverter and its main features.
Unboxing of the box to show the manual, wiring, accessories and the inverter.
Description of the external connectors, strings, MPPTs and the unit's closing system.
Inspection of the internal electronic boards, fans and connection terminals.
Technical review of the inverter's voltages, currents, PV powers and efficiencies.
Detailed explanation of the touchscreen and parameter setup on the inverter.
Steps to connect the inverter to the mobile app via Wi-Fi and Bluetooth.
Final assessment of the product, highlighting its price, versatility and performance.
The Domótica Solar channel dedicates a 31-minute video to the Felicity IVGM6KLP1G2 hybrid inverter, rated at 6 kW. The presenter unboxes the unit, opens it up, goes through its technical data and sets it up with a battery from the same brand.
The video's verdict is positive: according to the presenter, it is a very complete unit, priced at around 800 euros and suitable for residential installations. What follows summarises what each part of the video shows, so you can find each topic in its chapter.
What's in the box
The unboxing includes the manual, a mounting plate to hang the unit, a Wi-Fi logger, a clamp meter and an accessory box. The accessories include mounting screws, MC4 connectors, a tool for those connectors, a temperature probe for the battery, an RJ45 cable for the battery, and terminals for the power and earth cables.
The presenter highlights that the enclosure's closing system reduces the number of screws to handle: removing two screws and turning a part releases the cover.
It has a scrap-level price, we are talking around 800 euros.
Internal design and connections
Inside, the inverter uses active cooling with two fans and a control board with replaceable modules. According to the presenter, this layout makes repairs easier, since you only need to identify the faulty board and replace it.
On the outside there are battery terminals, grid, generator and backup inputs, ports for parallel inverters, RJ45 and BMS connections, and RS485 ports for connecting a meter or extracting data. The unit has two string inputs, unlike the 3 kW model, which has just one.
On the PV side, you can connect up to 12 kW of panels, twice its power rating.
Key technical data
The battery accepts between 40 and 60 V, which covers 48 V and 51.2 V lithium iron phosphate systems, and also lead if configured by voltage. The maximum charge and discharge current is 135 A. The presenter notes that, although the unit converts at most 9,600 W, the battery only absorbs about 35 A in his case, so the rest of the energy can go to the home's consumption.
Each PV input withstands up to 500 V and the MPPT range runs from 145 to 425 V. With 12 kW of connectable panels, the unit can handle 600 W or 700 W modules without problem, according to its analysis. On output, the rated power is 6,000 W, with a continuous maximum of 6,600 W, and in off-grid mode it supports peaks of 12 kW for 10 seconds. The maximum efficiency is 97.6% and the MPPT exceeds 99%. It has an IP65 rating, weighs 19.8 kg and measures 47 × 37.6 × 25 cm.
On-screen and app configuration
The touch menu shows the status of the panels, the battery, the grid and the home. From there you set the charge and discharge limits, the battery capacity and the SOC percentages for starting the generator or charging from the grid. The presenter explains that the limits act as caps: the lowest value always prevails.
The unit offers working modes such as priority sale, zero export to the grid and zero export to backup, plus solar power curtailment, peak shaving mode and six time slots. To connect with the Felicity Solar app, you create a plant, scan the inverter, enter its Bluetooth key and configure Wi-Fi. The presenter warns that the network must be 2G for the logger to work.
Presenter's verdict
For the presenter, the price is the main argument, close to 800 euros for a unit with two MPPTs and an input for microinverters or a generator. He also values the build quality and the quick-release enclosure. He further states that the unit complies with Royal Decree 140 and standard UNE 217002 in Spain, so it can be legalised without problems.
The video does not include performance tests measured by the channel beyond the setup and reading of on-screen data, so the assessment is based on inspection and the presenter's experience.
Enjoying this? Get the Energy brief
Every Friday: prices, subsidies and what changed in your market.
✓ Free · seven editions · one click to leave