GadgetsNews wire, 4 h ago

Lowering router transmit power can steady patchy home Wi-Fi, one reviewer finds

Reported by XDA Developers

Image: XDA Developers

A reviewer at XDA Developers says that lowering the transmit power of a home router fixed weak Wi-Fi in one problem room. The article, published on 16 November 2026, argues against the usual reflex of buying a bigger router or pushing more power out of it. The writer's point is that a louder router can hide the real problem. This is one person's experience in one home, not a lab test.

The reviewer explains the imbalance in a Wi-Fi link. A router plugs into the mains, so it can use larger antennas and more power than a phone or laptop, which must save battery and usually has small internal antennas. The router is therefore heard clearly even at the edge of coverage, and the device shows a healthy signal. The device's replies arrive weak, however. The link then falls back to slower data rates and needs more retransmissions. Uploads and video calls usually suffer first, which is why they often fail before a plain download does.

The test focused on the 2.4 GHz band. Its longer wavelength lets it pass through walls and reach further, so at the same power level it often looks like the better choice, even when 5 GHz would give a better experience. The reviewer's router, a TP-Link Archer BE3600, used Smart Connect, which places both bands under one network name and lets the router assign devices to a band. The reviewer notes that devices still make the final decision, and that signal strength is the main factor in that choice.

After setting transmit power to Medium on the combined network, the reviewer saw devices in far rooms move to 5 GHz more often instead of holding onto the 2.4 GHz connection. Devices that had been switching rapidly between the two bands settled down. Video calls and uploads improved in those edge areas. Downloads became slightly slower, a trade-off the reviewer said was acceptable.

The article adds that the effect should be stronger on a mesh system with several access points. Devices tend to stay with the node they first joined. The writer cites iPhones that do not look for a better access point until the signal drops to about -70 dBm, which is weak compared with a nearby node. Lowering the router's power lets devices move sooner. In the reviewer's detached house, the change mattered less when bands were split, because fixed devices can be placed on the right band. The setting mattered mainly for devices that moved around.

The method is low risk because the settings can be reverted. The suggested test is to measure speed and latency in the problem room, lower the transmit power one step, and measure again. If anything gets worse, switch back. The account does not say how many devices were tested, and it gives no independent measurements. It is also unknown how the change would work with other router models or other house layouts.

Enjoying this? Get the Gadgets brief

Every Monday: the gadgets worth your money.

✓ Free · seven editions · one click to leave

Topics
Story continues on XDA DevelopersAdd us as a preferred source on GoogleSee our stories first in Google’s Top Stories.
Get alerts on big newsOnly the big news, at most once a day. No email, no account.

Original reporting by the sources above. Summary by smart-home.space.