Getting started with 3D printing: printers, materials and first steps with the Snapmaker U1

Jonatan Castro explains how a filament 3D printer works, which materials are worth knowing and how to go from a digital file to the first printed part, using the Snapmaker U1 as an example.

¿Quieres empezar a imprimir en 3D? Empieza por aquíGetting started with 3D printing: printers, materials and first steps with the Snapmaker U1. Plays from YouTube (privacy-enhanced mode).

This is our summary of Jonatan Castro’s video, published with their permission. The full video and all credit for it are on their channel.

What the video covers

0:00
Introduction

Introduction to the world of 3D printing and presentation of the Snapmaker U1 printer.

0:53
What is a 3D printer?

Explanation of how 3D printers work and the basic parts of a filament printer.

5:31
Types of 3D printers and materials

Differences between filament and resin printers, and a detailed description of materials such as PLA, PETG, ABS and TPU.

9:11
Unboxing, assembly and calibration of the Snapmaker U1

Demonstration of the unboxing, assembly and automatic calibration of the Snapmaker U1.

11:46
Designing, downloading and slicing 3D models

How to find or design 3D models and how to use the Snapmaker Orca slicer to prepare prints.

20:41
Printing tips, cleaning and conclusions

Final tips on cleaning the bed, the importance of the first layer and the advantages of multicolour printers.

In this 25-minute video, Jonatan Castro introduces 3D printing to those who have not yet started. He explains the differences between the main technologies, the role of materials and the full process, from the digital model to the finished part.

His thread is the Snapmaker U1, a printer he has been using for several months. Castro makes clear that he requested the machine from the manufacturer, that it is not a sponsored review, and argues that almost everything he shows applies to other brands. His conclusion is that today a 3D printer works more as a tool than as a technical project.

How a filament printer works

Castro describes the filament printer as the most common type at home. It takes a spool of plastic, heats it and deposits it onto a surface called the bed. He compares it to a hot glue gun, though far more precise and without manual intervention.

The object is built layer by layer: the machine draws one layer, lifts a minimal distance and adds the next. According to the creator, filament printers can have different structures, such as a moving bed, CoreXY or Delta, but all build the part in the same way, and only the machine's movement changes.

Until a few years ago, owning a 3D printer was almost like having another project, but today it is a tool.

Presentador, at 0:00 in the video

Filament or resin, and which material to choose

Castro distinguishes two main home technologies. Resin printers offer more detail on very small parts, such as miniatures, but require handling liquid resin, washing the parts and curing them. For someone who wants to make useful objects, he considers the filament printer the simplest, most versatile and affordable option.

On materials, he says PLA covers most household uses: it is easy to print, cheap, and suitable for decorations, organisers, prototypes and almost any indoor part. PETG handles heat and humidity better, while ABS and ASA withstand higher temperatures. ASA also has good UV resistance, making it suitable for outdoor use. TPU is flexible, useful for example for phone cases. Filaments with carbon fibre or wood, he warns, require special nozzles or conditions.

On third-party filament, he says it works if it is 1.75 mm in diameter and of good quality. The official brand offers more integration: Snapmaker spools carry an RFID chip that the printer reads to identify colour and material.

This is neither a review nor sponsored in any way.

Presentador, at 0:35 in the video

Assembly and calibration of the Snapmaker U1

Castro says the box arrived well protected and that the U1 comes with many parts to assemble, including a toolbox more complete than he expected. In his experience, assembly is simple and the instructions are easy to follow, but it took him about an hour. It includes installing the spool holders, feeders, cables and print heads, as well as removing the transport protections.

Calibration is automatic, so daily maintenance essentially comes down to keeping the bed clean. Castro recalls that his first printers, from the Artillery brand, required manual calibration, constant adjustment and even a USB stick to transfer files. For the U1 he also mentions the enclosure, which according to the manufacturer lowers noise from about 55 to about 49 decibels and helps keep temperatures more stable for materials such as ABS, ASA or nylon.

From digital model to first part

You need a 3D model before printing. Castro advises starting by downloading designs from free libraries, such as Snapmaker Space, Printables, MakerWorld or Thingiverse, and leaving design for later. If you want to design, he mentions TinkerCAD as a simple option, and Onshape or Fusion 360 for more advanced projects.

The slicer converts the model into code that the printer can read. Castro uses Snapmaker Orca, which already includes the machine's configuration. For a first test he recommends a small PLA part without supports, a 0.4 mm nozzle and a 0.20 mm profile, which is the usual choice for almost any part. According to him, a filament printer can usually handle overhangs of up to about 45 degrees from vertical; if the angle is greater, supports or reorienting the part may be needed. He stresses that the first layer is the most important and that automatic calibration cannot compensate for a dirty bed. For cleaning he suggests lukewarm water with mild detergent and avoiding touching the print area with your fingers.

On multicolour printing, the U1 has four print heads and, according to the manufacturer, changes colour in about 5 seconds. Castro believes it only pays off if you often print in several colours per part; otherwise, a standard printer is enough. He closes the video by noting that the printer becomes quite addictive when a design on screen turns into an object within a few hours.

Enjoying this? Get the Gadgets brief

Every Monday: the gadgets worth your money.

✓ Free · seven editions · one click to leave

Topics
Add us as a preferred source on GoogleSee our stories first in Google’s Top Stories.
Get alerts on big newsOnly the big news, at most once a day. No email, no account.