DIY E-Ink Home Assistant dashboard with a touchscreen: parts, costs and build steps
A maker built a desk-mounted E-Ink dashboard that shows Home Assistant data and takes touch input. He shares what the parts cost, what failed and how the enclosure was mounted.
We may earn a commission when you buy through links on this page. It never changes what we recommend.
DIY E-Ink Home Assistant dashboard with a touchscreen: parts, costs and build steps. Plays from YouTube (privacy-enhanced mode).This is our summary of GreatScott!’s video, published with their permission. The full video and all credit for it are on their channel.
What the video covers
The creator introduces the DIY E-Ink smart home dashboard project and its benefits.
An introduction to TryHackMe, a cyber security learning platform sponsoring the video.
The creator explores components and tests a capacitive touchscreen with an ESP32.
Testing different E-Ink panels and driver boards before settling on the Inkplate 10.
Designing three dashboard pages for Home Assistant and setting up MQTT communication.
3D-printing the frame and mounting the finished E-Ink dashboard next to the monitor.
GreatScott! presents a custom desk companion: a touch-enabled E-Ink display that acts as a Home Assistant dashboard. The project grew out of his existing E-Ink calendar, which he likes because it stays on, uses very little power and does not glow in the room.
In the video he works through the hardware choices, the coding, the MQTT link to Home Assistant and a 3D-printed enclosure mounted beside his monitor. He concludes that the result is a useful, always-on display that stays out of the way and draws little power.
Why a desk display, and what it replaces
The starting point was a simple E-Ink calendar that pulls the family schedule for the next seven days from Home Assistant. The creator values how quiet it is: it is always visible, it does not emit a bright light, and it needs almost no power.
He spends much of his day at the same desk, yet still reached for his phone to check the calendar, look at solar output or control devices. His plan was a larger E-Ink panel with a touchscreen, so the same information and controls would sit in front of him at all times.
This might actually be one of the most useful projects I've built so far.
Choosing and testing a touchscreen
The touch layer was the easiest part. He found a 9.7-inch capacitive panel, originally a replacement part for an Android car navigation unit, for about 26 euros. He noted its thick, heavy glass, which gives it a high-quality feel.
The GT911 controller talks over I2C, and its programming guide made it straightforward to poll a status register and read the X and Y coordinates. He tested it with an ESP32 that printed touch positions to a serial monitor, then used a small Python script to plot the data on a computer.
The E-Ink panel that failed and the switch to Inkplate 10
The first large E-Ink panel he tried cost 53 euros and was paired with an open-source driver board. Demo code showed a thick line that never updated, whatever refresh settings he used. Compiling with ESP-IDF gave more memory and made the line smaller, but it did not disappear, so he concluded the panel was faulty.
He then chose the Inkplate 10, which costs more but includes power circuitry, an ESP32, an SD card slot, lithium-ion battery support and a GPIO expander. It also ships with an Arduino library that works in the Arduino IDE, so he no longer needed ESP-IDF. He found the blacks clearly better than on his earlier panel.
Dashboard pages and the MQTT link
He settled on three pages. The first holds sensor readings and controls for blinds, lights, switches and thermostats. The second shows house consumption, solar production and battery status. The third recreates the seven-day calendar.
He used an LLM to generate the many lines, rectangles and buttons at exact pixel positions, which he said would have taken a long time by hand. Home Assistant automations publish sensor data over MQTT, and the ESP32 subscribes to those values and publishes commands back. Partial refreshes update only changed areas. A transparent touch layer over the buttons supports arrows and left-right swipes between pages.
Enclosure and mounting
The housing was 3D printed in red PTG filament after several prototypes. The touchscreen is held in the front piece with mounting tape, the Inkplate attaches to the back with M3 bolts, and M3 heat-set inserts let two screws lock the two halves together.
For the monitor mount he used a pivot adapter, a 20 by 4 mm aluminium flat bar cut to his monitor's height, and upper and lower hooks that grip the top and bottom of the monitor. He called the result a little wobbly. Power comes from an unused USB port on the monitor. The creator says the code and 3D print files are linked in the video description.
Enjoying this? Get the Smart Home brief
Every Tuesday: what changed in Matter, hubs and security.
✓ Free · seven editions · one click to leave


