Shelly Pro 2CB: a smart circuit breaker with Wi-Fi, Ethernet and local control

A smart thermal-magnetic circuit breaker with real thermal and magnetic protection, wired connection and local control. Enreta Domotica explains which circuits it is worth using it on and what it lacks.

🔴 POR FIN! Un MAGNETOTÉRMICO WiFi + RJ45, de VERDAD | Shelly Pro CBShelly Pro 2CB: a smart circuit breaker with Wi-Fi, Ethernet and local control. Plays from YouTube (privacy-enhanced mode).

This is our summary of Enreta Domotica’s video, published with their permission. The full video and all credit for it are on their channel.

What the video covers

0:00
Introduction to the Shelly Pro 2CB

The video introduces the Shelly Pro 2CB as a smart thermal-magnetic circuit breaker with advanced connectivity features.

2:12
Example of use: Home automation of lighting

The creator explains how the Shelly Pro 2CB can be used to control and protect an entire lighting circuit in a home.

4:03
Protections and technical specifications

The video details the thermal and magnetic protection capabilities of the device and its compliance with European standards.

5:37
Versions and available models

The creator outlines the different versions of the Shelly Pro circuit breakers, including 1CB, 2CB, 3CB, and 4CB models.

7:29
Connectivity and physical features

The video highlights the device's connectivity options, including Wi-Fi, Bluetooth, and an RJ45 Ethernet port.

10:36
Voltage measurement and limitations

The creator discusses the device's voltage monitoring capabilities and notes the absence of power consumption measurement.

12:10
Additional protections and safety

The video explains the over-voltage and under-voltage protection features and the importance of manual resetting for safety.

16:52
Use cases and conclusion

The creator provides practical examples of using the device with sensors and concludes with a final verdict on its utility.

The creator of the Enreta Domotica channel reviews the Shelly Pro 2CB, a thermal-magnetic circuit breaker with Wi-Fi, Bluetooth and an RJ45 Ethernet port. According to him, unlike the smart DIN-rail relays he had tested before, this device includes real thermal and magnetic protection, as well as remote control and automations.

His conclusion is that it is an interesting product for specific circuits, such as certain lighting lines, a garage or a second home. It does not replace the RCD or the other protective devices in the installation, and it is not a universal solution for all the circuit breakers in a home.

What sets it apart from a smart relay

The central idea of the video is that this device is a real circuit breaker. The author recalls that until now he had tested devices that looked like circuit breakers but were actually smart DIN-rail relays. They could switch, measure consumption and apply some electronic protections, but they lacked the thermal and magnetic protection of a conventional breaker.

With the Pro 2CB, according to his explanation, a circuit can be made smart without adding a relay to control it. The device offers Wi-Fi, Bluetooth and Ethernet connectivity, integrates with Home Assistant, and allows automations and scripts to run locally. The author also raises doubts that the video tries to answer, such as what happens in a short circuit, or whether a smart circuit breaker or a conventional one with a separate relay is preferable.

We are talking about real thermal-magnetic protection.

Creador, at 5:19 in the video

An example with the home's lighting

To illustrate its usefulness, the creator imagines controlling a home's entire lighting circuit. The usual approach, he says, is to combine a conventional circuit breaker that protects the circuit with a relay that switches it on and off. With the Pro 2CB, those two functions are combined in a single device, always chosen according to the circuit's rating.

This way, a floor's lighting can be cut from the phone, with Home Assistant or through an automation, for example when going on holiday. The author recommends it for non-essential circuits.

Shelly has released a very interesting product.

Creador, at 17:45 in the video

Protections, versions and what it does not measure

The Pro 2CB includes thermal protection, which acts in case of overload, and magnetic protection, which reacts quickly to a short circuit. According to the author, it complies with European regulations, which allows its distribution in Spain and the rest of Europe, and it has a breaking capacity of 6 kA. He stresses that the protection depends on the physical model chosen and cannot be changed by software.

The range has four versions: the 1CB, single-pole, breaks only the phase; the 2CB, two-pole, breaks phase and neutral; the 3CB, for three-phase, breaks all three phases; and the 4CB breaks all three phases and the neutral. Ratings range from 10 to 63 amps. According to the specifications he cites, it has an electrical life of more than 6,000 cycles, although the author has not tested this and would not use it to switch lights on and off with every movement.

What disappointed him most is that it does not measure consumption. It shows voltage, but not watts or kilowatt-hours, so an additional meter is needed to measure consumption. He says he would have liked to see it integrated, perhaps in a future version.

Reset, lockout and proposed uses

If the circuit breaker trips due to an overload or a short circuit, it cannot be reset from the app. You have to go to the panel, check the cause and reset it by hand. The author considers this logical for safety reasons. The device does allow automatic recovery to be configured for over-voltage and under-voltage, but not for load faults.

Among the use cases, the creator suggests disconnecting an induction hob if a smoke or heat sensor detects fire, without the need for an additional relay. He warns, however, that this is a complementary automation and not a fire protection system. Another idea is to cut off the electric water heater when a water leak sensor detects moisture, using Bluetooth communication and local scripts. He also points out a front switch that blocks remote control, although it keeps the thermal and magnetic protections active.

Price, space and verdict

The two-pole version costs 87 euros. The author points out that the price should be compared with a conventional circuit breaker plus a relay such as a Shelly Pro, and that one should decide which functions are really needed. Another factor is space: the 1CB takes two DIN modules, the 2CB three, the 3CB four and the 4CB five. In some cases a compact circuit breaker plus a relay may take up less space.

His verdict is favorable but limited. He sees it as useful for certain lighting lines, garage circuits, technical rooms, secondary panels and remote homes, and he is considering it for the renovation of his own home. He rules out filling panels with smart devices just for the sake of it. In his conclusion, it is not advisable to change all the circuit breakers in the house, but rather to choose the right solution for each need, and the installation should be done by a professional.

RelatedAqara FP400 vs Shelly Presence Gen 4: which radar sensor suits your homeRelatedShelly Camera with Frigate: local face and plate recognition for 40 eurosRelatedPaul Hibbert links ChatGPT and Home Assistant to a Heatable solar and battery system

Enjoying this? Get the Smart Home brief

Every Tuesday: what changed in Matter, hubs and security.

✓ Free · seven editions · one click to leave

Topics
Add us as a preferred source on GoogleSee our stories first in Google’s Top Stories.
Get alerts on big newsOnly the big news, at most once a day. No email, no account.